Audio Multi-Effects
Space Multi
Space Multi can use what are called "spatial" effects, such as choruses that impart spaciousness and fatness to
sounds, flangers that add undulations, delays that combine a delayed sound, and reverbs that add lingering
reverberations.
fig.4-09(Space Multi)
Input L
Input R
Enhancer
By adding sounds which are out-of-phase with the direct sound, this effect enhances the definition of the sound,
and pushes it to the forefront.
EH SW (switch)
Off, On
Turns the enhancer effect on/off.
EH Sens (sensitivity)
0 – +64 – +127
Adjusts the manner in which the enhancer will be applied relative to the input signals.
EH Mix (mix level)
0 – +64 – +127
Adjust the amount of the phase-shifted sound that is mixed into the input.
3-Band Equalizer
Adjusts the tone. Parametric control is provided for the middle range.
EQ SW (switch)
Off, On
Switches the equalizer effect on/off.
EQ Low (low gain)
-12 – 0 – +12 dB
Adjusts the low frequency range tone.
EQ MidF (middle frequency)
200 – 1000 – 8000 Hz
Specify the center of the frequency range that will be adjusted by the "EQ Mid Gain."
EQ MidQ (middle Q)
0.5 – 2.0 – 8.0
Adjusts the width of the area affected by the EQ centered at the "EQ Mid Freq." Higher values will narrow the
area.
2
3-Band
Enhancer
Equalizer
(Off = 0, On = 1)
Audio Multi-Effects
Noise
Chorus/
Suppressor
Flanger
Output L
Reverb
Output R