Gtr Multi 2 (Guitar Multi 2) - Roland SC-8820 Owner's Manual

Effects

49: GTR Multi 2 (Guitar Multi 2)

Guitar Multi 2 provides Compressor (Cmp), Overdrive or
Distortion (OD), Equalizer (EQ), and Chorus or Flanger (CF)
effects connected in series.
fig.9-52
L
Cmp
R
Cmp (Compressor)
Cmp Atck (Compressor Attack)
Adjusts the time over which the sound will rise after it is
input.
Cmp Sus (Compressor Sustain)
Adjusts the time over which low-level sounds are boosted
until they reach a specified volume.
Increasing the value will shorten the time. When the value
is modified, the level will also change.
Cmp Level (Compressor Level)
Adjusts the volume of the compressor sound.
Cmp Sw (Compressor Switch)
Turns the compressor on/off.
OD (Overdrive/Distortion)
OD Sel (OD Select)
Selects either Overdrive or Distortion.
+OD Drive (OD Drive)
Adjusts the degree of distortion. The volume will change
together with the degree of distortion.
OD Amp (Overdrive Amp Simulator Type)
Small/BltIn/2-Stk/3-Stk [7 (40 03 09)]
Selects the type of guitar amp
Small: small amp
BltIn: single-unit type amp
2-Stk: large double stack amp
3-Stk: large triple stack amp
OD Amp Sw (OD Amp Switch)
Turns OD Amp on/off.
OD Sw (OD Switch)
Turns Overdrive or Distortion on/off.
72
[04H, 01H]
OD EQ CF
0–127 [1 (40 03 03)]
0–127 [2 (40 03 04)]
0–127 [3 (40 03 05)]
Off/On [4 (40 03 06)]
Odrv/Dist [5 (40 03 07)]
0–127 [6 (40 03 08)]
Off/On [8 (40 03 0A)]
Off/On [9 (40 03 0B)]
EQ (Equalizer)
EQ L Gain (EQ Low Gain)
Adjusts the low-range gain of the equalizer.
EQ M Fq (EQ Mid Frequency)
Sets the center frequency for the equalizer mid-range.
EQ M Q (EQ Mid Q)
Adjusts the width of the area centered at the EQ M Fq
setting in which the gain will be affected. The area affected
will become narrower as this value is increased.
EQ M Gain (EQ Mid Gain)
Adjusts the gain of the area specified by the EQ M Fq
parameter and the EQ M Q parameter.
EQ H Gain (EQ High Gain)
Adjusts the high-range gain of the equalizer.
CF (Chorus/Flanger)
CF Sel (CF Select)
Selects either Chorus or Flanger.
CF Rate
Adjusts the speed of modulation for the chorus or flanger.
CF Depth
Adjusts the depth of modulation for the chorus or flanger.
CF Fb (CF Feedback)
Adjusts the amount (%) of the flanger sound that will be
returned to the input. Negative (-) values will invert the
phase.
* In the case of Chorus, this will have no effect.
#CF Mix (CF Mix)
Adjusts the volume of the chorus or flanger sound.
Level (Output Level)
Adjusts the output level.
-12–+12 [10 (40 03 0C)]
200–6.3k [11 (40 03 0D)]
0.5/1.0/2.0/4.0/9.0 [12 (40 03 0E)]
-12–+12 [13 (40 03 0F)]
-12–+12 [14 (40 03 10)]
Chorus/Flangr [15 (40 03 11)]
0.05–6.40 [16 (40 03 12)]
0–127 [17 (40 03 13)]
-98%–+98% [18 (40 03 14)]
0–127 [19 (40 03 15)]
0–127 [20 (40 03 16)]