Gtr Multi 3 (Guitar Multi 3) - Roland SC-8820 Owner's Manual

50: GTR Multi 3 (Guitar Multi 3)

Guitar Multi 3 connects Wah (Wah), Overdrive or Distortion
(OD), Chorus or Flanger (CF), and Delay (Dly) effects in
series.
fig.9-53
L
Wah
R
Wah
Wah Fil (Wah Filter Type)
Selects the type of filter.
LPF: The wah effect will be produced over a
broad frequency range.
BPF: The wah effect will be produced in a narrow
frequency range.
+Wah Man (Wah Manual)
Sets the center frequency at which the effect will be
produced.
Wah Peak
Adjusts the way in which the wah effect will be applied to
the region of the center frequency. Lower settings will
produce a wah effect in a broad area around the center
frequency, and higher settings will produce a wah effect in
a narrower area around the center frequency.
Wah Sw (Wah Switch)
Turns Wah on/off.
OD (Overdrive/Distortion)
OD Sel (OD Select)
Selects either Overdrive or Distortion.
#OD Drive (Overdrive Drive)
Adjusts the depth of distortion. The volume will change
together with the depth of distortion.
OD Amp (Overdrive Amp Simulator Type)
Small/BltIn/2-Stk/3-Stk [7 (40 03 09)]
Selects the type of guitar amp
Small: small amp
BltIn: single-unit type amp
2-Stk: large double stack amp
3-Stk: large triple stack amp
OD Amp Sw (OD Amp Switch)
Turns OD Amp on/off.
OD L Gain (OD Low Gain)
Adjusts the low-range gain for the overdrive (or distortion)
sound.
OD H Gain (OD High Gain)
Adjusts the high-range gain for the overdrive (or distortion)
sound.
OD Sw (OD Switch)
Turns overdrive or distortion on/off.
[04H, 02H]
Delay
OD CF
LPF/BPF [1 (40 03 03)]
0–127 [2 (40 03 04)]
0–127 [3 (40 03 05)]
Off/On [4 (40 03 06)]
Odrv/Dist [5 (40 03 07)]
0–127 [6 (40 03 08)]
Off/On [8 (40 03 0A)]
-12–+12 [9 (40 03 0B)]
-12–+12 [10 (40 03 0C)]
Off/On [11 (40 03 0D)]
CF (Chorus/Flanger)
CF Sel (CF Select)
Selects either Chorus or Flanger.
CF Rate
Adjusts the modulation speed for the chorus or flanger.
CF Depth
Adjusts the modulation depth for the chorus or flanger.
CF Fb (CF Feedback)
Adjusts the amount (%) of the flanger sound that is
returned to the input. Negative (-) values will invert the
phase.
* In the case of Chorus, this will have no effect.
CF Mix
Adjusts the volume of the chorus or flanger sound.
Dly (Delay)
Dly Time (Delay Time)
Adjusts the time from the original sound until when the
delay sound is heard.
Dly Fb (Delay Feedback Level)
Adjusts the amount of the delay sound that is returned to
the input.
Dly Mix (Delay Mix)
Adjusts the volume of the delay sound.
Level (Output Level)
Adjusts the output level.
Effects
Chorus/Flangr [12 (40 03 0E)]
0.05–6.40 [13 (40 03 0F)]
0–127 [14 (40 03 10)]
-98%–+98% [15 (40 03 11)]
0–127 [16 (40 03 12)]
0–635ms [17 (40 03 13)]
0–127 [18 (40 03 14)]
0–127 [19 (40 03 15)]
0–127 [20 (40 03 16)]
73