Connecting To A Midi Keyboard; Making Connections - Roland SC-8820 Owner's Manual

Connecting to a MIDI Keyboard

Making Connections

This section explains how to connect this unit to a MIDI keyboard and play the
sounds. If you wish to connect a sequencer or personal computer to this unit, refer
to p.10.
Set the COMPUTER switch located on the back of this unit to MIDI.
fig.1-9e
INPUT
Powered Speaker etc.
MIDI OUT
MIDI keyboard
(PC-160, PC-180 etc.)
The setting
Left
LINE IN
Right
Connecting to Your Computer/MIDI Keyboard
SC-8820
is MIDI
Stereo set etc.
To prevent malfunction
and/or damage to speakers
or other devices, always
turn down the volume, and
turn off the power on all
devices before making any
connections.
The new setting of the
COMPUTER switch will
take effect when the power
is turned on. Turn off the
power before changing the
setting of the COMPUTER
switch.
Be sure to match the L/R
Output jacks of the SC-8820
with the L/R input jacks on
your audio equipment. If
you get them reversed, the
sounds you play will be
reversed too.
17