Coin cell
Removing the coin cell
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the battery.
4. Remove the memory.
5. Remove the SSD.
6. Remove the
WLAN
card.
7. Remove the
heatsink-fan
8. Remove the
power adapter
9. Remove the
LED
daughterboard.
10. Remove the speaker.
11. Remove the
display
assembly.
12. Remove the
touchpad
buttons.
13. Remove the
hinge
cap.
14. Remove the
display
bezel.
15. Remove the hinges.
16. Remove the
display
panel.
17. Remove the
camera-microphone
18. Remove the
display
cable.
19. Remove the
system
board.
1. Disconnect the coin cell cable from the connector on the system board [1].
2. Remove the coin cell from the computer.
Installing the coin cell
Connect the coin cell cable to its connector on the system board.
74
Removing and installing components
before working inside your
assembly.
port.
daughterboard.
computer.