Table of Contents
Advertisement
2. Place the heatsink fan assembly in the computer [1].
3. Replace the two (M2x3) screws in sequence (2 > 1) on fan case and four (M2x3) screws in sequence (4 > 3 > 2 > 1) on the heatsink
fan assembly [1].
4. Connect the fan cable to the system board [2].
1. Install the
WWAN
card.
2. Install the battery.
3. Install the
base
cover.
4. Follow the procedure
after working inside your
computer.
Removing and installing components
33
Advertisement
Table of Contents
