Table of Contents
Advertisement
9. Remove the
LED
daughterboard.
10. Remove the speaker.
11. Remove the
display
assembly.
12. Remove the
touchpad
buttons.
13. Remove the
system
board.
14. Remove the
coin
cell.
15. Remove the
power
button.
16. Remove the keyboard.
1. After removing these components, you are left with the palmrest assembly.
2. Install the following components to the new palmrest assembly:
1. Install the keyboard.
2. Install the
power
button.
3. Install the
coin
cell.
4. Install the
system
board.
5. Install the
display assembly
6. Install the speaker.
7. Install the
LED
board.
8. Install the
power adapter
9. Install the
heatsink-fan
10. Install the
WLAN
card.
11. Install the SSD.
12. Install the memory.
13. Install the battery.
14. Install the
base
cover.
15. Follow the procedure
after working inside your
84
Removing and installing components
port.
assembly.
computer.
Advertisement
Table of Contents
