Table of Contents
Advertisement
8. Remove the
power adapter
9. Remove the
display
assembly.
10. Remove the
system
board.
11. Remove the
coin
cell.
12. Remove the
power-button
1. Lift the latch and disconnect the keyboard cable [1] from the touchpad module.
NOTE:
Backlit keyboards have an extra backlight cable connection to the touchpad module.
2.
NOTE:
This image shows disassembly of a carbon fiber variant, an Aluminum variant of this model has 23 M1.6x2
screws securing the keyboard assembly to palmrest.
Remove the 17 (M1.6x2) screws [2] and separate the keyboard assembly from the palmrest [3].
3. Remove the two (M2x2) screws [1] to lift the keyboard from the keyboard support plate.
80
Removing and installing components
port.
board.
Advertisement
Table of Contents
