3. Replace the metal bracket over the power adapter port [1].
4. Replace the single (M2x3) screw to secure the power adapter port to the palmrest assembly [2].
1. Install the battery.
2. Install the
base
cover.
3. Follow the procedure
after working inside your
computer.
Speakers
Removing the speakers
1. Follow the procedure in
before working inside your
computer.
2. Remove the
base
cover.
3. Remove the battery.
1. Disconnect the speaker cable from its connector on the system board [1].
2. Unroute the speaker cable from the rubber routing channel stuck on the coin cell [2].
3. Peel back the tape securing the speaker cable to the touchpad button board [3].
Removing and installing components
35