Table of Contents
Advertisement
NOTE:
Backlit keyboards have an extra backlight cable to be connected to the touchpad module.
1. Install the
power
button.
2. Install the
coin
cell.
3. Install the
system
board.
4. Install the
display assembly
5. Install the
power adapter
6. Install the
heatsink-fan
7. Install the
WLAN
card.
8. Install the SSD.
9. Install the memory.
10. Install the battery.
11. Install the
base
cover.
12. Follow the procedure
after working inside your
Palmrest
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the battery.
4. Remove the memory.
5. Remove the SSD.
6. Remove the
WLAN
card.
7. Remove the
heatsink-fan
8. Remove the
power adapter
port.
assembly.
computer.
before working inside your
assembly.
port.
computer.
Removing and installing components
83
Advertisement
Table of Contents
