Figure 6. Installing the power-button board with FPR
NOTE:
Power-button board with finger print reader, has a cable that
1. Install the
system
board.
2. Install the
touchpad
buttons.
3. Install the
display assembly
4. Install the
power adapter
5. Install the
heatsink-fan
6. Install the
WLAN
card.
7. Install the SSD.
8. Install the memory.
9. Install the battery.
10. Install the
base
cover.
11. Follow the procedure
after working inside your
Keyboard
Removing the keyboard
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the battery.
4. Remove the memory.
5. Remove the SSD.
6. Remove the
WLAN
card.
7. Remove the
heatsink-fan
port.
assembly.
computer.
before working inside your
assembly.
computer.
connects
to the system board.
Removing and installing components
79