Table of Contents
Advertisement
S YS T E M M E N U
The fixture includes an easy to navigate system menu. The LCD touch panel display located
on the front of the fixture (see image below), provides access to the main system menu and
is where all necessary system adjustments are made to the fixture. During normal operation,
pressing the ENTER (Check Mark) button once will access the fixture's main menu. Once in the
main menu you can navi-gate through the different functions and access the sub-menus with
the UP and DOWN buttons. Once you reach a field that requires adjusting, press the ENTER
button to activate that field and use the UP and DOWN buttons to adjust the field. Pressing
the ENTER button once more will confirm your setting. You may exit the main menu at any time
without making any adjustments by pressing the ESC (Back Arrow) button.
To access the LCD Menu Control Display via the internal battery, press and hold the BATTERY
ICON button for 3 seconds. The LCD Menu Control Display will shut OFF automatically about 1
minute from the last button press.
Note: An Elation C-Loader II can be used to update fixture software. Contact Elation Service
for more information @ 323-582-3322 | Fax 323-832-9142 | support@elationlighting.com
To update software using a USB Flash Drive, please see page 25.
21
Advertisement
Table of Contents
