Elation FUZ418 User Manual page 19

I N S TA L L AT I O N G U I D E L I N E S
RIGGING
The Fuze SFX is fully operational in (3) different mounting positions, hanging upside-down,
mounted sideways on trussing, or set on a flat level surface. Overhead rigging requires extensive
experience, including among others calculating working load limits, installation material being
used, and periodic safety inspection of all installation.material and the fixture. If you lack
these qualifications, do not attempt the installation yourself. Improper installation can result
in bodily injury.
CAUTION: Falling fixtures can cause severe injury or serious equipment damage!
For this reason, fixtures should be installed and inspected only by qualified
personnel. Do not install the unit if you lack the qualifications to do so, or if you
have doubts about the safety and security of the installation setup or location!
Always attach an appropriately SAFETY CABLE whenever installing this fixture
in a suspended environment to ensure fixture will not fall if mounting / rigging
hardware fails.
19