System Menu - Elation FUZ035 User Manual

S Y S T E M M E N U
The fixture features with an easy to navigate system menu. The control panel (see image
below) located on the front the fixture provides access to the main system menu, where all
necessary system adjustments can be made. During normal operation, pressing MODE button
once will access the fixture's main menu. Once in the main menu, navigate through the differ-
ent functions and access the sub-menus with the UP, DOWN, RIGHT, and LEFT buttons. Once
you reach a field that requires adjusting, press the ENTER button to activate that field and
use the UP and DOWN buttons to adjust the field. Pressing the ENTER button once more will
confirm your setting. You may exit the main menu at any time without making any adjust-
ments by pressing the MODE/ESC button.
NOTE: To access the LCD Menu Control Display via the internal battery, press and hold the
DC SWITCH button for 3 seconds. The LCD Menu Control Display will shut OFF automatically
after about 1 minutes of inactivity.
INFORMATION DISPLAYED DURING INITIAL POWER ON
When the fixture is initially powered ON, the display shows the following information:
Software Update Motor Reset
Please Wait... Please Wait...
SOFTWARE UPDATES:
Software updates can be uploaded to this unit using the Elation C-Loader II software upload-
er device. For further information, or to obtain this device, please contact Elation Service:
323-582-3322 | support@elationlighting.com
17