Elation FUZ418 User Manual page 16

G O B O I N S TA L L AT I O N
7. Locate the rotating gobo that will be replaced. Grip the edges of the geared gobo holder
and gently lift (pictured at left) until the gobo holder clears the surface of the gobo wheel.
Then pull the gobo holder out and away (pictured at right).
8. Place the gobo holder on a flat, level surface with the geared side down. Locate the tab of
the spring, and use a precision pick (or similar tool) to push the spring tab inward. Remove
the retaining spring and carefully separate the gobo from the gobo holder. Exercise caution
to avoid scratching the gobo.
9. Install the new gobo and reassemble the fixture by following the steps above in reverse order.
GOBO INSTALLATION COMPLETE!
16