Qs Flow - Siemens SITRANS L 7ML5400 Operating Instructions Manual

Commissioning
6.3 Quick Start Wizards
6.3.1.3

QS Flow

Use this wizard to configure simple flow applications.
(Visible on LUT430 (Pump and Flow), and LUT440 (OCM) configured models only.
1. Press RIGHT arrow
2. Press RIGHT arrow
3. Press RIGHT arrow
4. At each step, press DOWN arrow
item, or RIGHT arrow
5. Scroll to desired item and press RIGHT arrow
arrow
6. At any time, you can press UP arrow
68
to activate PROGRAM mode and open menu level 1: MAIN MENU.
two times to navigate to menu item 1.1.1.
to open QS Flow.
to open Edit mode: the current selection is highlighted.
to continue.
to accept default values and move directly to the next
to store the change, then press DOWN
to go back, or LEFT arrow
Operating Instructions, 04/2021, A5E33329501-AG
to cancel the wizard.
SITRANS LUT400