Volume (2.6.); Vessel Shape (2.6.1.) - Siemens SITRANS L 7ML5400 Operating Instructions Manual

Parameter reference (LUI)
9.2 Setup (2.)
9.2.6

Volume (2.6.)

Carries out a volume conversion from a level value.
Note
Default settings in the parameter tables are indicated with an asterisk (*) unless explicitly
stated.
9.2.6.1

Vessel Shape (2.6.1.)

89Defines the vessel shape and allows the LUT400 to calculate volume instead of level. If
None is selected, no volume conversion is performed. Select the vessel shape matching the
monitored vessel or reservoir.
Vessel Shape
*
184
None
LCD Display/
Description
NONE/
No volume calculation required
LINEAR/
Upright, linear (flat bottom)
CYLINDER/
Flat end horizontal cylinder
PARABOLIC BOTTOM
HALF SPHERE BOTTOM
Operating Instructions, 04/2021, A5E33329501-AG
Also required
N/A
maximum volume
maximum volume
maximum volume,
dimension A
maximum volume,
dimension A
SITRANS LUT400