Pump Records (3.2.7.) - Siemens SITRANS L 7ML5400 Operating Instructions Manual

Parameter reference (LUI)
9.3 Maintenance and Diagnostics (3.)
Alarms (3.2.6.1.)
History of alarms. Displays type of alarm, value at which alarm triggered, state of alarm.
OCM (3.2.6.2.)
Flow logs. Displays head and flow values.
Daily Totals (3.2.6.3.)
Daily totals for both totalizers. Displays maximum and minimum values for flow and
temperature, average flow, and daily totalizer (DT) and running totalizer (RT) values.
PV (3.2.6.4.)
Primary Variable. Displays PV type (e.g. Level), PV value and temperature.
Note
PV is controlled by the mA function (see Current Output Function (2.5.1.) (Page 180)).
Therefore, the LUI operation can be changed (via Sensor Mode (2.1.2.) (Page 173)) without
affecting the process being controlled.
9.3.2.7

Pump Records (3.2.7.)

Relay usage.
Run Time Relay 2 (3.2.7.1.)
Read or set the total running time of Relay 2 in hours.
Values
Run Time Relay 3 (3.2.7.2.)
Read or set the total running time of Relay 3 in hours.
Values
Relay Pump 1 (3.2.7.3.)
Read only. Relay assigned to Pump 1.
To change the relay assignment, see Relay Pump 1 (2.7.1.2) (Page 189).
248
Range: 0 to 999999
Range: 0 to 999999
Operating Instructions, 04/2021, A5E33329501-AG
SITRANS LUT400