7.11.4.4
Leopold Lagco Flume
①
②
③
④
⑤
⑥
* The transducer must be above the maximum head by at least the blanking value (see Near
Range (2.2.4.) (Page 176)).
Parameter
Primary Measuring Device (PMD) (2.15.1.)
(Page 234)
Flow Exponent (2.15.3.2.) (Page 236)
Maximum Head (2.15.3.3.) (Page 237)
Maximum Flow at 20 mA (2.15.3.4.) (Page 237)
Zero Head Offset (2.15.3.5.) (Page 237)
Flowrate Units (2.15.3.7.) (Page 238)
K Factor (2.15.4.1.) (Page 240)
Typical Flow Exponent for Leopold Lagco Flume; consult your flume documentation.
1)
Required for exponential device absolute calculation only.
2)
SITRANS LUT400
Operating Instructions, 04/2021, A5E33329501-AG
Point of measurement
Converging
Throat
Diverging
Zero head
Transducer
2
7.11 Open Channel Monitoring (OCM)
Value
Exponential Devices
1.547
1
General Operation
129