Modifiers (2.7.2.) - Siemens SITRANS L 7ML5400 Operating Instructions Manual

Parameter reference (LUI)
9.2 Setup (2.)
9.2.7.2

Modifiers (2.7.2.)

Note
Default settings in the parameter tables are indicated with an asterisk (*) unless explicitly
stated.
Wall Cling Reduction
Enable (2.7.2.1.1)
Enables/disables Level Setpoint Variation (2.7.2.1.2) (Page 192).
Options
Level Setpoint Variation (2.7.2.1.2)
Varies the ON and OFF setpoints to reduce material buildup on the walls (defined in Units
(2.1.1.) (Page 172)).
Values
This value is the range in which the setpoints are allowed to deviate. The pump ON and OFF
Setpoint values are randomly varied inside the range to ensure that the material level does
not consistently stop at the same point.
①
②
③
④
192
Random setpoint range
Level setpoint ON
Level setpoint variation
Level setpoint OFF
*
Range: 0.000 to 99999.000
Default: 0.000
Operating Instructions, 04/2021, A5E33329501-AG
ENABLED
DISABLED
SITRANS LUT400