Leopold Lagco Flume - Siemens SITRANS LUT400 Operating Instructions Manual

Required for exponential device absolute calculation only.
b
7.11.4.4

Leopold Lagco Flume

①
②
③
④
⑤
⑥
* The transducer must be above the maximum head by at least the blanking value (see Near
Range (2.2.4.) (Page 172)).
Parameter
Primary Measuring Device (PMD) (2.15.1.)
(Page 230)
Flow Exponent (2.15.3.2.) (Page 231)
Maximum Head (2.15.3.3.) (Page 232)
Maximum Flow at 20 mA (2.15.3.4.) (Page 232)
Zero Head Offset (2.15.3.5.) (Page 233)
Flowrate Units (2.15.3.7.) (Page 233)
K Factor (2.15.4.1.) (Page 235)
Typical Flow Exponent for Leopold Lagco Flume; consult your flume documentation.
1)
Required for exponential device absolute calculation only.
2)
SITRANS LUT400
Operating Instructions, 07/2019, A5E33329501-AC
Point of measurement
Converging
Throat
Diverging
Zero head
Transducer
Value
Exponential Devices
1.547
1
2
General Operation
7.11 Open Channel Monitoring (OCM)
127