NCR SelfServ 90 Kit Instructions
Kiosk mini cam lock with lock pawl, dark white
Hide thumbs
Also See for SelfServ 90:
- Instructions manual (14 pages) ,
- Kit instructions (8 pages) ,
- Kit instructions (6 pages)
Related Manuals for NCR SelfServ 90
Summary of Contents for NCR SelfServ 90
- Page 1 Kit Instructions NCR SelfServ™ 90 (7709) Kiosk Mini Cam Lock with Lock Pawl, Dark White 7709-K231 Issue A...
-
Page 2: Revision Record
NCR, therefore, reserves the right to change specifications without prior notice. All features, functions, and operations described herein may not be marketed by NCR in all parts of the world. In some instances, photographs are of equipment prototypes. Therefore, before using this document, consult with your NCR representative or NCR office for information that is applicable and current. -
Page 3: Kit Contents
Mini Cam Lock with Lock Pawl, Dark White Introduction This kit provides the components to add a lock and key set to the NCR SelfServ™ 90 Kiosk. Kit Contents... -
Page 4: Installation Procedure
Mini Cam Lock with Lock Pawl, Dark White Installation Procedure 1. Disassemble the Mini Cam Lock into the following components: • Lock Barrel • Mounting Nut • Pawl Screw 2. Insert the Lock Barrel into the Spacer. - Page 5 Mini Cam Lock with Lock Pawl, Dark White 3. Open the kiosk. 4. Inside the kiosk cabinet, position the Adapter Plate, aligning its hole to the cabinet lock hole. Hold the plate in place with one hand.
- Page 6 Mini Cam Lock with Lock Pawl, Dark White 5. From outside the kiosk cabinet, place the Lock Plate on the cabinet lock hole. 6. Insert the Lock Barrel and Spacer assembly into the cabinet lock hole.
- Page 7 Mini Cam Lock with Lock Pawl, Dark White 7. Inside the kiosk cabinet, secure the lock assembly using the Mounting Nut. Use 3 N-m (2.21 lbf-ft) torque when tightening the nut. 8. Install the Pawl in the unlocked position as shown below and secure the Pawl using the Pawl Screw.
- Page 8 Mini Cam Lock with Lock Pawl, Dark White 9. Test the Lock using its key and note the locked and unlocked positions of the Pawl. 10. Close the kiosk and test the Lock using its key.