NCR SelfServ 90 Kit Instructions
Pin pad arm
Hide thumbs
Also See for SelfServ 90:
- Instructions manual (14 pages) ,
- Kit instructions (8 pages) ,
- Kit instructions (6 pages)
Advertisement
Quick Links
Advertisement
Related Manuals for NCR SelfServ 90
Summary of Contents for NCR SelfServ 90
- Page 1 Kit Instructions NCR SelfServ™ 90 (7709) PIN Pad Arm 7709-K720 Issue B...
-
Page 2: Revision Record
NCR, therefore, reserves the right to change specifications without prior notice. All features, functions, and operations described herein may not be marketed by NCR in all parts of the world. In some instances, photographs are of equipment prototypes. Therefore, before using this document, consult with your NCR representative or NCR office for information that is applicable and current. -
Page 3: Kit Contents
PIN Pad Arm Introduction This kit provides a PIN Pad mounting arm for the NCR SelfServ™ 90 Kiosk. Kit Contents... -
Page 4: Installation Procedure
PIN Pad Arm Installation Procedure Warning: Disconnect the AC power cord before disassembling the Terminal. 1. Open the front of the kiosk. 2. Remove PIN pad arm blank plate. a. Unstrap the cinch straps (2) that secure the power supply to the bracket. Remove the power supply and the cinch straps from the bracket. - Page 5 PIN Pad Arm b. Remove the screws (2) that secure the power supply bracket. Remove the bracket. c. Remove the screws (2) that secure the blank plate. Remove the blank plate.
- Page 6 PIN Pad Arm 3. Insert the mounting studs of the angular arm through the mounting holes on the cabinet and secure the arm with nuts (4). 4. Re-install the power supply bracket and power supply.