Pulse Programming; Cycle Programming; Setting Holiday Function - Theben TR 611 top2 Operating Instructions Manual

Pulse programming

MENU
PROGRAM
NEW
u
CHECK
MODIFY
DELETE
END
Example: Switch on pause signal on Monday 8:05 hrs for 5
sec
Press MENU
†
¾
Select PROGRAM, confirm with OK
†
¾
Select NEW, confirm with OK
†
¾
With u select PULSE, confirm with OK
† ¾
Select CHANNEL C1 or C2, confirm with OK
† ¾
Select ON, confirm with OK
†
¾
Use the + or – buttons to enter hour, minute, second (8:05)
†
¾
and confirm with OK
Use the + or – buttons to enter the duration of the pulse in
† ¾
minutes and seconds (5 sec) and confirm with OK. MONDAY
is displayed.
Select day, confirm with OK
†
¾
Select COPY or SAVE
†
¾
To save press u and confirm with OK
† ¾
To copy press OK
† ¾

Cycle programming

In addition to turn-on and turn-off times (switching time)
and short time pulses (pulse) cycle times (cycle) can also be
programmed. The pulse duration (+ pulse pause) is limited to
17 hrs, 59 min, 59 sec
L Cycle times refers to cyclically repetitive time functions
such as fan controls, urinal rinses etc.
Example: Switch on water rinsing Monday from 8:00 to 20:30
hrs every 15 min for 20 sec (8:00:00–8:00:20 On; 8:15:00–
8:15:20 On; 8:30:00–8:30:20 On etc.)
Cycle programming:
•
Start cycle: Monday 8:00 hrs
•
Pulse duration: 20 s
•
Pause duration (pause): 14 min and 40 s
•
End cycle: Monday 20:30 hrs
L Observe the number of maximum electrical switching
cycles when using the cycle function.
u
u SWITCH PULSE
CHANNEL C1
MEM FREE
84
ON C1 ON
LENGTH
MINUTE
SECONDS
MONDAY
COPY
MENU
PROGRAM
u
HOUR
MINUTE
SECONDS
PULSE
SAVE
Press MENU
†
¾
Select PROGRAM, confirm with OK
†
¾
Select NEW, confirm with OK
† ¾
With u select CYCLE, confirm with OK
† ¾
Select CHANNEL C1 or C2, confirm with OK
† ¾
START CYCLE is displayed, confirm with OK
†
¾
Use the + or – buttons to enter hour, minute, day (8:00 hrs
†
¾
Monday) and confirm with OK
Enter PULSE LENGTH (20 s), confirm with OK
† ¾
Enter pause duration PAUSE (14 min and 40 s), confirm
† ¾
with OK
Select WITH END, confirm with OK
†
¾
STOP CYCLE is displayed, confirm with OK
†
¾
Enter end times of the cycle (20:30 hrs) and confirm with
† ¾
OK

Setting holiday function

MENU
MANUAL
CHANNEL C1
PERM ON
PERM OFF
OVERRI ON
TIMER
HOLIDAY
Press MENU
†
¾
Select MANUAL and press OK to confirm
†
¾
Select CHANNEL C1 or C2, confirm with OK
† ¾
Select HOLIDAY and press OK to confirm
† ¾
Select ON and press OK to confirm
† ¾
Select START HOLIDAY and press OK to confirm
†
¾
Enter YEAR, MONTH, DAY, HOUR and press OK to confirm
†
¾
Select END HOLIDAY and press OK to confirm
† ¾
Enter YEAR, MONTH, DAY, HOUR and press OK to confirm
† ¾
NEW u
CYCLE
u
CHANNEL C1
CHECK
MEM FREE
84
MODIFY
START
CYCLE
DELETE
END
PAUSE
WITH END
STOP CYCLE
ON
u
RANDOM BEGINN
HOLIDAY
END
END
HOLIDAY
u
HOUR
MINUTE
MONDAY
PULSE
LENGTH
ENDLESS
4