Installing The Postscript 3 Printer Driver (Windows 95/98/Me - Ipp) - Ricoh Aficio 1027 Software Manual

Preparing for Printing
Only printers that respond to a broadcast from the computer appear. To use
a printer not listed here, click [Specify address], and then enter the NetBEUI ad-
dress. The NetBEUI address can be checked with the configuration page. For
information about printing a configuration page, see
uration Page". The NetBEUI address appears in the format of "\\RN-
Pxxxx\xxx" on the configuration page. Enter the printer's network path in the
format of "%%Computer name\Share name". Use "\\" instead of "%%" at the
beginning.
You cannot print using printers beyond routers.
Q
Click [OK].
R
Check that the selected port is highlighted in [Printer to the following port],
and then click [OK].
S
Restart the computer to complete installation.
❒ A user code can be set after the printer driver installation. For information
about user code, see the printer driver Help.

Installing the PostScript 3 Printer Driver (Windows 95/98/Me - IPP)

A
Quit all applications currently running.
B
Insert the CD-ROM into the CD-ROM drive.
The installer starts.
Auto Run may not work with certain operating system settings. If this hap-
pens, launch "Setup.exe" on the CD-ROM root directory.
C
Select an interface language, and then click [OK].
The default interface language is English.
❒ The printer driver with the selected language will be installed. The English
printer driver is installed when the following language is selected: Cestina,
Magyar, Polski, Portugues, Suomi.
D
Click [PostScript 3 Printer Driver].
Add Printer Wizard starts.
E
Click [Next].
F
Click [Local Printer], and then click [Next].
A dialog box for selecting the printer manufacturer and model name appears.
p.130 "Printing a Config-
24