NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
1. Route the power-button board cable through the slot on the top panel.
2. Align and snap the power-button module into the slot on the top panel.
3. Route the power-button board cable through the routing guides on the chassis.
4. Connect the power-button board cable to the system board.
5. Place the computer in an upright position.
Post-requisites
1. Replace the
top
cover.
2. Replace the
slim optical
drive.
3. Replace the
front
cover.
4. Replace the
right-side
cover.
82
Replacing the power-button board
Replacing the power-button board
computer. After working inside your computer, follow the instructions in
56
After