NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
1. Align the notch on the memory module with the tab on the memory-module slot and insert the memory module into the memory-
module slot.
2. Press the memory module down until it clicks into place.
3. Place the computer in an upright position.
Post-requisites
Replace the
right-side
cover.
32
Replacing the memory module
Replacing the memory module
computer. After working inside your computer, follow the instructions in
20
After