Table of Contents
Advertisement
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
CAUTION:
Solid-state drives are fragile. Exercise care when handling the solid-state drive.
CAUTION:
To avoid data loss, do not remove the solid-state drive while the computer is in sleep or on state.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
Remove the
right-side
cover.
Procedure
1. Lay the computer on the left side and locate the solid-state drive slot on the system board.
2. Remove the screw (M2x3.5) that secures the solid-state drive to the system board.
3. Slide and lift the solid-state drive off the system board.
Removing the solid-state drive
computer. After working inside your computer, follow the instructions in
Removing the solid-state drive
27
After
41
Advertisement
Table of Contents
