Chapter 17: Replacing The Power-Button Board; Procedure; Post-Requisites - Dell Inspiron 24 5000 Service Manual

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your
inside your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•

Procedure

•

Post-requisites

Procedure
1. Connect the power-button board cable (0SDC1) to the power-button board and route the cable through the routing guide
on the middle frame.
2. Align the power-button board to the slot on the middle frame and place the power-button board on the middle frame.
3. Align the screw holes on power-button board shield to the screw holes on middle frame.
4. Replace the two screws (M2x3.5) that secure the power-button board shield to middle frame.
Post-requisites
1. Replace the inner frame.
2. Replace the stand.
3. Replace the back cover.
Replacing the power-button board
computer. After working inside your computer, follow the instructions in
www.dell.com/
Replacing the power-button board
17
After working
29