Table of Contents
Advertisement
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
1. Remove the
right-side
cover.
2. Remove the
wireless
card.
Procedure
NOTE:
Note the routing and the colour of antenna cables while removing them so that you can replace them correctly.
1. Lay the computer on the left side and remove the screw (M3x5) that secures the antenna cables to the chassis.
2. Peel the tape that secures the antenna cables to the chassis.
3. Remove the screw (M3x5) and the tape that secures the antenna cables to the chassis.
4. Remove the antenna cables from the routing guide on the chassis.
Removing the antenna
computer. After working inside your computer, follow the instructions in
57
After
Removing the antenna
83
Advertisement
Table of Contents
