NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
Remove the
right-side
cover.
Procedure
1. Disconnect the light bar cable from its connector on the chassis.
2. Remove the screw (M3x5) that secures the light bar to the chassis.
3. Slide and remove the light bar from the chassis.
28
Removing the light bar
Removing the light bar
computer. After working inside your computer, follow the instructions in
17
After