Table of Contents
Advertisement
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
1. Tilt the computer towards the front until the base is facing up.
2. Align the tabs on the bottom cover with the slots on the chassis and snap the bottom cover to lock it in place.
3. Replace the three screws (M3x5) that secure the bottom cover to the chassis.
4. Place the computer in an upright position.
Post-requisites
Replace the
right-side
cover.
Replacing the bottom cover
computer. After working inside your computer, follow the instructions in
Replacing the bottom cover
62
After
89
Advertisement
Table of Contents
