Replacing The Power-Button Board; Procedure; Post-Requisites - Dell W19B Service Manual

Replacing the power-button
board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.

Procedure

1 Using the alignment post, align the screw hole on the power-button board with
the screw hole on the display-assembly base.
2 Replace the screw (M3x5) that secures the power-button board to the display-
assembly base.
3 Adhere the power-button board cable to the display-assembly base.
4 Slide the power-button board cable into the connector on the system board and
close the latch to secure the cable.

Post-requisites

1 Replace the system-board
2 Replace the back
3 Replace the stand.
48
computer. After working inside your computer, follow
After working inside your
shield.
cover.
computer. For more safety best
www.dell.com/
Before