Installing The 5.25 Odd Bay; Front Input And Output Panel; Removing Front Input And Output Panel - Dell YRC3G Owner's Manual

Installing the 5.25 ODD bay

1 Place the ODD bracket into the system slot.
2 Replace the (6-32 X 6.0mm) screws.
3 Install the:
a ODD
b front bezel
c side cover
4 Follow the procedure in

Front input and output panel

Removing front input and output panel

1 Follow the procedure in
2 Remove the:
a side cover
b front bezel
c front input and output bezel
d 5.25 inch ODD bracket
3 To remove the front input and output(I/O) panel:
a Disconnect the intruder switch cable [1], USB 3.1 cable [2], front I/O power cable [3], USB 3.1 cable [4], Speaker cable [5], Audio
cable [6]
28 Removing and installing components
After working inside your computer
Before working inside your computer.