Removing the diagnostic light
and button board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
1
Remove the
USB dongle-bay
2
Remove the
back
3
Remove the stand.
4
Remove the
system-board
5
Remove the
inner
6
Remove the
I/O
computer. After working inside your computer, follow
After working inside your
cover.
cover.
shield.
frame.
panel.
computer. For more safety best
www.dell.com/
Before
87