Identifier
Status
Removing the light bar
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Identifier
Status
Prerequisites
Remove the
right-side
Identifier
Status
Procedure
1
Disconnect the light bar cable from its connector on the chassis.
2
Remove the screw (M3x5) that secures the light bar to the chassis.
40
GUID-D2D3628D-0E08-458C-8A93-86FADC96720D
Released
computer. After working inside your computer, follow
After working inside your
GUID-1631ACD3-92F3-4946-AEAD-FF882430ADEE
Released
cover.
GUID-8B9E9AA4-9CF0-49C0-A7D8-A9D122215450
Released
computer. For more safety best
www.dell.com/
Before