Agilent Technologies 16533A 1-GSa/s Programmer's Manual page 35

ACQuire Subsystem
COUNt
COUNt
Command
:ACQuire:COUNt <count>
The COUNt command specifies the number of acquisitions for the running
weighted average. This command generates an error if Normal acquisition
mode is specified.
<count> {2|4|8|16|32|64|128|256}
Example
OUTPUT XXX;":ACQUIRE:COUNT 16"
Query :ACQuire:COUNt?
The COUNt query returns the last specified count.
Returned Format
[:ACQuire:COUNt] <count><NL>
Example
OUTPUT XXX;":ACQ:COUN?"
3–4