Format; Points - Agilent Technologies 16533A 1-GSa/s Programmer's Manual

WAVeform Subsystem

FORMat

FORMat
Command
:WAVeform:FORMat {BYTE|WORD|ASCii}
The FORMat command specifies the data transmission mode of waveform
data over the remote interface.
Example
OUTPUT XXX;":WAV:FORM WORD"
Query
:WAVeform:FORMat?"
The FORMat query returns the currently specified format.
Returned Format
[:WAVeform:FORMat]{BYTE|WORD|ASCii}<NL>
Example
OUTPUT XXX;":WAVEFORM:FORMAT?"

POINts?

Query
:WAVeform:POINts?
When WAVeform RECord is set to FULL, the POINts query always returns a
value of 32768 points. When WAVeform RECord is set to WINdow, then the
query returns the number of points displayed on screen.
Returned Format
[:WAVeform:POINts] <points><NL>
number of points depending on the setting of the WAVeform RECord
<points>
command
Example
OUTPUT XXX;":WAVEFORM:POINTS?"
10–10