M.2 Solid-State Drive - HP ProBook 445R G6 Maintenance And Service Manual

M.2 solid-state drive

Table 5-4 Solid-state drive descriptions and part numbers
Description
512 GB, PCIe, TLC
512 GB, PCIe, value
256 GB, PCIe
128 GB, SATA-3, TLC
Before removing the solid-state drive, follow these steps:
1. Prepare the computer for disassembly
2. Place the computer in Battery Safe mode
3. Remove the bottom cover
4. Remove the battery
Remove the solid-state drive:
1. Remove the Phillips M2.0 × 2.5 screw (1) that secures the solid-state drive to the computer.
2. Remove the solid-state drive (2) by pulling the module away from the slot at an angle.
Reverse this procedure to install the solid-state drive.
36 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts
(Preparation for disassembly on page
(Battery Safe mode on page
(Bottom cover on page
(Battery on page 40).
31).
32).
Spare part number
L59045-001
L59046-001
L59044-001
L59043-001
31).