Sending An Sms Message To The Explorer™ 500; Receiving A Message - Inmarsat EXPLORER 500 User Manual

Sending an SMS message to the EXPLORER™ 500
You can send an SMS message to the EXPLORER 500 e.g. from a mobile phone, using one of the
mobile subscriber numbers for voice. Dial
+870 <Mobile subscriber number>
To see the voice numbers of your EXPLORER 500, select PROPERTIES from the web interface or
from the display menu system and view Mobile subscriber numbers. Note, however, that these
numbers are only listed if they are available on the SIM card. Otherwise, refer to the information
included with your airtime subscription.
Note There are two Voice numbers, one for 3.1 kHz Audio and one for Standard Voice.

Receiving a message

If a message has arrived, the icon bar at the top of the web interface shows an unopened
envelope. Click the envelope to see the new message(s).
Otherwise, to see new messages, click MESSAGES from the left navigation pane.
The window shows new incoming messages.
Note The EXPLORER 500 does not accept more than 100 incoming messages (including read
and unread messages). If you have received 100 messages, you have to delete some of
them in order to free space for new messages. Otherwise, the new messages are
rejected.
If the message is not an SMS message but information of voice mail, call your voice mail service
number to hear the voice mail.
To find your voice mail service number, select MESSAGES > Message settings from the left
navigation pane and locate the Voice mail service number.
Note that the voice mail number is only shown if it is available on the SIM card. Otherwise, refer to
the information included with your Airtime subscription.
TT 98-122274-O Handling messages
Chapter 5: Using the web interface
89