Uploading Software - Inmarsat EXPLORER 500 User Manual

Uploading software

You can upload software to the EXPLORER 500 without entering the PIN. However, if the PIN is not
entered, you must enter the Administration user name and password.
To upload software to the EXPLORER 500, do as follows:
1. Acquire the new software version from Thrane & Thrane and save it on your computer.
2. In the web interface, select PROPERTIES from the left navigation pane.
The Software version field shows the current software version.
3. Click Upload from the left navigation pane.
If you have not entered the PIN at start-up, you are prompted for an Administration user
name and password.
4. If required, type in the Administration user name and password and click Logon.
The default user name is admin and the default password is 1234.
5. Click Browse...
6. Browse to the new software version and accept it.
7. Click the Upload button.
Note that the upload procedure takes a couple of minutes.
Note
TT 98-122274-O
When upload is done, your EXPLORER 500 automatically restarts with the new
software.
Properties, software upload and alarm list
Chapter 5: Using the web interface
120