Enabling Or Disabling An Interface - Inmarsat EXPLORER 500 User Manual

Enabling or disabling an interface

Overview
By default, all interfaces are enabled. However, you can disable the LAN interface, the Bluetooth
interface and/or the Phone/Fax interface in order to minimize the power consumption.
Note
The USB interface cannot be disabled; it is always enabled.
Using display and keypad
To enable or disable an interface using the display and keypad, do as follows:
1. Enter the menu system.
From the Main screen, press
2. Select SETTINGS > INTERFACES.
3. Select the interface you want to enable or disable.
4. Select ON to enable or OFF to disable.
Using web interface
To enable or disable an interface using the web interface, do as follows:
1. Connect a computer. Refer to the relevant section in this chapter, e.g. Connecting to the LAN
interface on page 66.
2. Access the web interface.
For further information, see The web interface on page 75.
3. From the left navigation pane in the web interface, select
SETTINGS and select the interface you want to enable or disable.
4. Select Enabled or Disabled at the top of the window.
TT 98-122274-O
or .
General
Chapter 4: Using the interfaces
50