Using A Computer With Bluetooth - Inmarsat EXPLORER 500 User Manual

Using a computer with Bluetooth

Before connecting a computer to the Bluetooth interface
The EXPLORER 500 supports various Bluetooth profiles. Remember to activate/install the profile(s)
you are going to use on your computer.
For a list of supported Bluetooth profiles, see Bluetooth interface on page 157.
The computer should be placed within a maximum distance of 100 m from the EXPLORER 500.
Note that this is the maximum distance in open air; the actual maximum distance may be shorter,
depending on the environment. In an office environment, you should be able to establish a
connection across the adjoining 2-3 rooms.
Note
The procedure may vary depending on the Bluetooth interface in your computer. Consult
your Bluetooth manual for details.
If the two devices have not been connected before, you need to pair the devices. For further
information, see the section Bluetooth pairing on page 51.
Connecting a computer to the Bluetooth interface
This section does not describe configuration of the Bluetooth interface. For information on
configuration, see Configuring the Bluetooth interface on page 104.
If the devices are already paired, do as follows to connect:
1. Place the computer close to the EXPLORER 500.
2. Power up the EXPLORER 500 and point the antenna.
3. Power up your computer.
4. Turn on Bluetooth on your computer.
If the devices are paired, the Bluetooth connection should now be established.
Note that if your Bluetooth connection is defined as a dial-up connection, you have to open
the dial-up connection before you can access the Internet or the web interface. See
Connecting to the USB interface on page 68.
Note
Max. 7 devices, including voice and data devices, can be connected simultaneously.
If connection fails, check that the interface is enabled in the EXPLORER 500.
If the Bluetooth icon is not present in the display Main screen and in the Home window of the web
interface, the interface is disabled. See Enabling or disabling an interface on page 50. If the
interface is enabled but connection fails, refer to the Troubleshooting Guide on page 144.
TT 98-122274-O Using a computer
Chapter 4: Using the interfaces
70