Creating A Dial-Up Connection - Inmarsat EXPLORER 500 User Manual

Creating a dial-up connection

Do as follows:
Note
The following description is for Windows XP. If you are using a different operating
system, the procedure may be different.
1. Start up your computer and the EXPLORER 500.
2. Connect the USB cable between your computer and the USB connector on your
EXPLORER 500, or place your paired Bluetooth computer close to the EXPLORER 500. For
information on Bluetooth, see Using a computer with Bluetooth on page 70.
3. On your computer, select Connect To from the Start menu.
4. Select Show All Connections.
5. Open the New Connection Wizard and click Next.
6. Select Connect to the Internet and click Next.
7. Select Set up my connection manually and click Next.
8. Select Connect using a dial-up modem and click Next.
If other modems are installed, the Wizard now shows a list of all installed modems.
For USB, select Thrane & Thrane EXPLORER port 1 or 2 from the list.
For Bluetooth, select your Bluetooth driver from the list.
9. In the ISP Name field, type a name for your connection and click Next.
TT 98-122274-O Using a computer
Chapter 4: Using the interfaces
71