Settings Menu - Inmarsat EXPLORER 500 User Manual

Settings menu

Point now
Important
If you need to repoint the antenna, select SETTINGS > POINT NOW.
This will bring you to the Pointing screen, described in Pointing the antenna towards the satellite
on page 24.
Setting the display backlight
To adjust the backlight of the display, do as follows:
Select SETTINGS > DISPLAY > BACKLIGHT.
1.
2. Select one of the following:
• ON: to have constant backlight.
• OFF: to turn the backlight off.
• TIMED: to set how long the light should be on after the last key was pressed (2, 5, 10, 30 or
60 seconds).
• SET LEVEL: to set the level of backlight (1 to 7).
Setting the display contrast
To adjust the contrast of the display, do as follows:
Select SETTINGS > DISPLAY > CONTRAST.
1.
2. Select one of the following:
• AUTOMATIC: to let the EXPLORER 500 automatically adjust the contrast according to the
temperature.
The contrast of the display is affected by the temperature. The EXPLORER 500 can
automatically adjust the contrast so that the display looks the same, regardless of changes
in the temperature.
• SET LEVEL: to set the contrast manually (1 to 7).
TT 98-122274-O
This function will interrupt any ongoing calls or sessions!
Chapter 3: Using the display and keypad
40