Battery connector and cable assembly
Table 5-10
Battery cable kit description and part number
Description
Battery cable kit
Before removing the battery connector and cable assembly, follow these steps:
1.
Prepare the computer for disassembly
2.
Remove the top cover (see
3.
Remove the graphics fan (see
4.
Remove the WLAN antenna (see
5.
Remove the battery (see
Remove the battery connector and cable assembly:
1.
Remove the two Phillips M2.5 × 4.5 screws (1) that secure each battery connector to the computer.
2.
Remove the connector assembly from the computer (2).
Reverse this procedure to install the battery connector and cable assembly.
(Preparation for disassembly on page
Top cover on page
14).
Fans on page
16).
WLAN antenna on page
Battery on page
24).
Spare part number
L62406-001
14).
21).
Component replacement procedures
29