Lutcontrol; Flat Field Correction Control - Omron STC-MBS881POE Product Specifications And User's Manual

LUTControl

11.5
Name
LUTSelector
LUTEnable [LUTSelector]
LUTIndex [LUTSelector]
LUTValue [LUTSelector] [LUTIndex]
LUTValueAll [LUTSelector]
PixelCorrectionAllEnabled
PixelCorrectionIndex
PixelCorrectionEnabled
[PixelCorrectionIndex]
PixelCorrectionX [PixelCorrectionIndex]
PixelCorrectionY [PixelCorrectionIndex]

Flat Field Correction Control

11.6
Name
FFCSelector
FFCType [FFCSelector]
FFCMeshWidth [FFCSelector]
FFCMeshHeight [FFCSelector]
FFCEnable [FFCSelector]
FFCIndex [FFCSelector]
FFCValue [FFCSelector] [FFCIndex]
FFCValueAll [FFCSelector]
STC-MBS881POE / STC-MCS881POE
Product Specifications and User's Guide
Description
Selects which LUT to control.
Activates the selected LUT.
Control the index (offset) of the coefficient to access in the selected
LUT.
Returns the Value at entry LUT Index of the LUT selected by LUT
Selector.
Accesses all the LUT coefficients in a single access without using
individual LUT Index.
Enable pixel correction for all pixels.
Determine index of targeted pixel for pixel correction.
Determine if targeted pixel is enabled for pixel correction.
Determine x-coordinate of targeted pixel for pixel correction.
Determine y-coordinate of targeted pixel for pixel correction.
Description
Selects which Correction is controlled by the FFC features.
Returns the FFC type.
Returns the Width of every mesh area for FFC table.
Returns the Height of every mesh area for FFC table.
Activates the selected FFC.
Control the index of the Value to access in the FFC table.
Returns the Value at entry FFC Index of the FFC table.
Accesses all the FFC table coefficients in a signal access without using
individual FFC Index. This feature can only be accessed
programmatically.
No.19S208-00
64/73