Table of Contents
Advertisement
7.2.7 To lower the switch box on the indoor unit
ERRA08~12E + ELVH/X12S18+23E
Daikin Altherma 3 R MT F
4P708474-1 – 2023.05
▪
"7.2.7 To lower the switch box on the indoor
▪
"7.4.4 To connect the drain hose to the
▪ When you need access to the high voltage switch box
2×
T25
5 If you need access to the high voltage components, remove the high voltage
switch box cover.
4×
T25
During the installation, you will need access to the inside of the indoor unit. To
have easier front access, put the switch box lower on the unit as follows:
Prerequisite: The user interface panel and front panel have been removed.
1 Remove the fixing plate at the top of the unit.
2 Tilt the switch box to the front and lift it out of its hinges.
7
Unit installation
|
4
unit" [
83]
4
drain" [
93]
Installer reference guide
83
Advertisement
Table of Contents
