Table of Contents
Advertisement
11
|
Configuration
11.3.6 Detailed screen with values
11.4 Preset values and schedules
11.4.1 Using preset values
Installer reference guide
166
a
c
b
a Settings
b Values
c Selected setting and value
Go through the list of settings.
Change the value.
Go to the next setting.
Confirm changes and proceed.
About preset values
For some settings in the system, you can define preset values. You only need to set
these values one time, then reuse the values in other screens such as the
scheduling screen. If you later want to change the value, you only have to do it in
one place.
Possible preset values
You can set the following user-defined preset values:
Preset value
Tank temperatures
[5.2] Comfort
under [5] Tank
setpoint
Restriction: Only
[5.3] Eco
applicable if a
setpoint
DHW tank is
present.
[5.4] Reheat
setpoint
Example:
7.2.1
Hours
Minutes
a
Possible actions on this screen
You can use these preset values in [5.5]
Schedule (weekly schedule screen for
the DHW tank) if the DHW tank mode is
one of the following:
▪
Schedule only
▪
Schedule + reheat
The software uses this preset value if
the DHW tank mode is
Schedule + reheat.
Time/date
11
30
c
b
Where used
ERRA08~12E + ELVH/X12S18+23E
Daikin Altherma 3 R MT F
4P708474-1 – 2023.05
Advertisement
Table of Contents
