Table of Contents
Advertisement
Editing the Scenes
This section explains the basic methods of editing a scene.
1.
Press the [HOME] button.
The audio mixer screen is shown on the left
monitor, and the multi-view screen is shown
on the right monitor.
2.
Touch the scene to edit on the multi-view screen.
3.
Touch <SCENE EDIT>.
The Scene Edit screen appears on the left and right monitors.
4.
Edit the scene on the Scene Edit screen.
(Right-side screen)
1
4
1
Select the layer to edit (operation layer)
Touch the layer to edit.
Touch <ON> to show or hide the respective layer.
2
Select the input video (source)
Touch and select <VIDEO> to view the input video signals from
the
3
HDMI 4K IN connectors. Touch the input video to select
which video you want to assign to the layer.
Touch
4
<HDMI 4-1>–<HDMI 4-4> to switch between the HDMI 4
input video signals.
* A black screen is shown when switching between video signals.
* The input video for HDMI 4 uses the same settings as VR-400UHD.
You can't configure the settings for each layer or scene.
2
3
(Left-side screen)
Square boxes (layer windows) are shown on the left-side screen to
represent each layer's position and size.
The layer that's selected in the right-side screen in "Operation
Layer" is targeted for editing.
Layer window operations
Position Drag a layer window to move it.
Drag the
symbol (size icon) at the bottom right
corner of a layer window to enlarge or shrink the
window.
Moving only one side of a window
Size
When you touch one side of a layer window in a layer
that's targeted for editing, an orange
(edge icon) appears.
Drag the
symbol to move only one side of the
targeted window.
* You can also change the position and size of layer windows that
aren't targeted for editing. For the parts of windows that overlap,
the layer targeted for editing is given priority.
Video operations inside a layer window
A
symbol (view icon) and a
shown in the windows of layers that are targeted for editing.
Drag the
symbol to adjust the position of the
Position
video inside the layer window.
Drag the
symbol (zoom icon) up and down to
Size
enlarge or shrink the video inside the layer window.
MEMO
¹ Since the changes you make to a scene are automatically
saved, you don't need to do anything to save them.
¹ When you touch <UNDO> on the right-hand screen before
the Scene Edit screen closes, you can revert the scene to how
it was before editing.
symbol
symbol (zoom icon) are
11
Advertisement
Table of Contents
